Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
85gr sierra hp fb with accurate 2520 load development
#1
So I’m going to preface this with I’m trying to use up components that I have the fewest of so that’s how I started this.
I have 200ct 85gr sierra hp fb bullets, and some lapua brass, Tula small rifle primers and some older accurate 2520. I look in the western powders loading manual and lucky me 2520 is the fastest powder with that bullet that I have currently. However they list 33.9gr of powder as the max, WOW.
My rifle is a cz 527 with the 16” threaded barrel, I just got a wood stock to replace the factory plasticy houge junk, which is why I’m doing new load development.
Started at 32.5gr and two seating depths 2.18 and 2.13
Everything has been Lee factory crimped

32.5gr a2520 lapua brass Tula small rifle primers
2.13 oal 2730fps

32.5gr a2520
2.18oal. 2770fps This is odd because it’s into the lands but sped up

Everything else is 2.182 oal

33gr a2520
2.182oal. 2800fps

33.5 a2520
2.182oal. 2815fps but first shot was 2870 other two were 2811 and 2817

33.9 a2520
2.182 2840fps

34.1 a2520
2.182oal. 2850 best group (.27” @100yds) but it’s full to the top of the neck and crunch a bullet down. This is over book max but 33.9 (book max) isn’t much lower from the very top. Super weird but kinda cool, going to verify
All loads were under and inch but as I sped up the groups tightened
Reply


Messages In This Thread
85gr sierra hp fb with accurate 2520 load development - by mblackmon4 - 06-04-2022, 02:24 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)