05-04-2022, 11:05 PM
LRRPF52 Wrote:28.5gr of Varget under the 123gr Scenar is the published max load by AA dating back many years to the initial test breech work Bill A. did for 6.5 Grendel.
How many times is this going to happen where the QL numbers are listed when someone is using published data?
Check with published data before referencing anything in QL. QL is just so far off the mark in so many cases, as to be disregarded.
Im not sure why anyone would reference it for 6.5 Grendel.
I have to agree with Klem on this one.
After doing some very detailed work with Varget in my cz grendel. Anything approaching 28.4 grains are more and my coal length had to be way past 2.300 to have room to not crush powder.
Now I had the mag length too run such long coal lengths but at normal ar15 mag lengths, 28.5 grains of varget is a maxed out crunchy load.