Maybe? No idea. Random parts. A bolt, nut, washers and 2 o rings would do the exact same job.
The AG version they "updated" to but didn't list the model of does NOT have a compass. The new model ends with a c, and their website does not reflect this. The user manual clearly states which versions are compatible so its very misleading.
Yelled at support, supposedly the ballistic does and they are swapping it out so 2 more days... After the ballistic, I will have tried them all, so far its on strike 2. Strike 3 is me setting it on fire and ordering a kestrel.
On a related note, i took the liberty of disassembling the meter to see what components were missing. Pcb has a 2015 silk screen and there is a resistor and I'm assuming a magnetometer missing (2 unpopulated spots). One of them is 2 pads for a resistor (silk screen R16), the other is 10 pads for some sort of IC. I bet I can find it on digikey based on the size, pin count, and where the ground and vcc pins are but instead ill take the ballistic apart also to see what .45 worth of components are needed to "upgrade" the every other neutered version and post pictures, instructions, etc online out of spite.
Willing to bet this is a mag3110 and a 4.7k resistor... its the only 10 pin magnetometer.
The AG version they "updated" to but didn't list the model of does NOT have a compass. The new model ends with a c, and their website does not reflect this. The user manual clearly states which versions are compatible so its very misleading.
Yelled at support, supposedly the ballistic does and they are swapping it out so 2 more days... After the ballistic, I will have tried them all, so far its on strike 2. Strike 3 is me setting it on fire and ordering a kestrel.
On a related note, i took the liberty of disassembling the meter to see what components were missing. Pcb has a 2015 silk screen and there is a resistor and I'm assuming a magnetometer missing (2 unpopulated spots). One of them is 2 pads for a resistor (silk screen R16), the other is 10 pads for some sort of IC. I bet I can find it on digikey based on the size, pin count, and where the ground and vcc pins are but instead ill take the ballistic apart also to see what .45 worth of components are needed to "upgrade" the every other neutered version and post pictures, instructions, etc online out of spite.
Willing to bet this is a mag3110 and a 4.7k resistor... its the only 10 pin magnetometer.