03-31-2022, 01:48 AM
ported45 Wrote:I could not find the exact one that was on his upper on PSA's website. It only had three detents on the screw. The other I found on the site said that it had like 5 detents on its adjustment screw.
I loosened the set screw about a 1/4 turn just so the adjustment screw was easier to turn. I then would continue to open the gas block and still feel the detent notch and re-tighten the set screw on the side. I had it so far out at one point that I was afraid that it would come completely out. I thought I was just about there, but when I kept opening up the screw, it would still never lock back on the catch.
There was no reason to loosen the side screw that held the detent adjustment in. Tighten that back up and I bet your detent would work as it should. As far as thinking your there... you could have been way off, unless you took it all the way out you have no idea where the end was.