Barnes 120g mb and ar comp

[myrifle]

Hey Sbowhuntr,

"Bear in mind that almost all of these loads — unless you see a work-up progression shown — are what the reloader considered max in his gun. He stopped for a reason. Think about this. So start 3 grains of powder lower than the loads listed here and carefully work up using standard safe reloading procedures."

Hope this helps.

If I started that low from some of the loads listed here, my gun wouldnt even cycle.

I used up some arcomp with several 120 grain hpbt bullets and always ended up in the 28 to 28.4 grain range. For a safe load that gave great sd/es numbers and adequate to great groups while providing a proper cycling gun.