Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
120 gr Match Burners at 500+
#5
LRRPF52 Wrote:G1 is fine out to 600yds with most Spitzer bullets traveling decent speeds.

Use G7 drag model past 600yds as a general rule where it will give you better predictions.

This is for bullets without doppler Radar data.

If your SD is truly only 2fps, thatÂ’s world-class SD. How many sample sizes for that SD?

Yeah, it's kind of crazy - especially since they are Chargemaster 1500 drops. I did 4 shot groups and this was the ladder (velocity/sd/es). 27.2 and 27.5 strung horizontally and 27.5 was getting a bit warm and 27.8 was too much. 26.6 seemed the spot to go since +/- 0.3 gr were only +/- 20 fps.

[ATTACH=CONFIG]18441[/ATTACH]

Temp was 82 for the ladder and about 72 this morning. It was a lot easier to see impacts on the 440 this morning than the 550 and the first 2 I did were a few inches apart at the same elevation. I adjusted the 0.2 mils and put one right on the other dead center. It'll probably be 2 weeks, but I'm definitely interested in seeing what a 10 shot string does. Also interested to see velocity when it gets down into the 50s.


Attached Files Thumbnail(s)
   
Let's go Brandon!
Reply


Messages In This Thread
120 gr Match Burners at 500+ - by StoneHendge - 11-27-2021, 11:43 PM
120 gr Match Burners at 500+ - by StoneHendge - 12-02-2021, 10:51 PM
120 gr Match Burners at 500+ - by Longbow - 12-02-2021, 11:44 PM
120 gr Match Burners at 500+ - by LRRPF52 - 12-03-2021, 01:08 AM
120 gr Match Burners at 500+ - by StoneHendge - 12-03-2021, 06:03 AM
120 gr Match Burners at 500+ - by lazyengineer - 12-03-2021, 02:11 PM
120 gr Match Burners at 500+ - by Robpiat - 12-05-2021, 02:44 AM
120 gr Match Burners at 500+ - by StoneHendge - 12-06-2021, 11:38 PM
120 gr Match Burners at 500+ - by s3silver - 12-07-2021, 05:23 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)