Timing help
#6
I have an adjustable gas block. I typically reload 100 grain bullets or less and had switched to a h3 buffer with those. I’m thinking I was over gassed trying to get the heavy buffer to lock back with the 123s maybe causing the swipes. I’m hoping with the jp buffer and springs I can retune the gas block and clear some of the swipes up.

Here are my chrono results with the gas block closed.
Arcomp:
25.6-2120fps
25.8-2145fps
26-2167fps
26.2-2185fps
26.4-2200fps
26.6-2220fps
26.8-2229fps
27-2255fps
27.2-2262fps
27.4-2275fps
27.6-2276fps
27.8-2299fps
28-2314fps

8208xbr
26.7-2107fps
26.9-2174fps
27.1-2181fps
27.3-2198fps
27.5-2207fps
27.7-2256fps
27.9-2276fps
28.1-2273fps
28.3-2317fps
28.5-2315fps

Hornady brass cci 450 primers 2.25 oal .020 off the lands.
Reply


Messages In This Thread
Timing help - by Pwoller - 10-30-2021, 03:35 AM
Timing help - by grendelnubi - 10-30-2021, 04:20 PM
Timing help - by VASCAR2 - 10-30-2021, 04:45 PM
Timing help - by Pwoller - 10-30-2021, 11:22 PM
Timing help - by VASCAR2 - 10-31-2021, 03:36 AM
Timing help - by Pwoller - 10-31-2021, 01:14 PM
Timing help - by VASCAR2 - 10-31-2021, 03:50 PM
Timing help - by Pwoller - 10-31-2021, 07:40 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)