10-26-2021, 11:34 AM
Sorry I missed this was a new AA rifle. I doubt this new rifle would be over gassed. Its possible the gas block is not aligned properly or might be under gassed. The symptoms of over gassed and under gassed can be very similar. Id be surprised if AA barrel had to large of a gas port.
You should be gtg with factory ammo and I think I would contact AA. I wouldnt replace the extractor on a new rifle without first contacting the vendor. The only thing I might do is remove the O ring of the extractor spring and try a few more rounds ensuring the barrel/chamber and BCG were clean. If it still failed Id contact AA.
You should be gtg with factory ammo and I think I would contact AA. I wouldnt replace the extractor on a new rifle without first contacting the vendor. The only thing I might do is remove the O ring of the extractor spring and try a few more rounds ensuring the barrel/chamber and BCG were clean. If it still failed Id contact AA.