10-08-2021, 08:33 PM
The size and shape of holes is going to tell you a lot more about your paper than your bullet. This is the same group. Target printed on standard store brand white free sheet (which is going to use hardwood pulp - likely from Brazil these days) stapled onto a backstop made from thin corrogated cardboard stock (a sheet of thin corrugated paperboard sandwiched between two sheets of paperboard (all softwood pulp) stapled to a frame made from pine 1x2s). The frame does have some fore to aft movement since it stands in thin steel cups in cement in the ground.
Same group. This is the free sheet target:
[ATTACH=CONFIG]18274[/ATTACH]
This is the cardboard stock behind it:
[ATTACH=CONFIG]18275[/ATTACH]
Holes were made with 6.5mm 123 gr Scenars launched at 2870 with Shooters World Precision in a 1:8 twist 22" steel Proof Research 6.5 CM barrel.
Hardwood pulp has a much shorter fiber than softwood. Paperboard / cardboard has a longer fiber, and it also has varying degrees of clay in it. The cardboard stock is of reasonable quality - not like the crappy cardboard used to box Made In China crap you get at Walmart.
Same group. This is the free sheet target:
[ATTACH=CONFIG]18274[/ATTACH]
This is the cardboard stock behind it:
[ATTACH=CONFIG]18275[/ATTACH]
Holes were made with 6.5mm 123 gr Scenars launched at 2870 with Shooters World Precision in a 1:8 twist 22" steel Proof Research 6.5 CM barrel.
Hardwood pulp has a much shorter fiber than softwood. Paperboard / cardboard has a longer fiber, and it also has varying degrees of clay in it. The cardboard stock is of reasonable quality - not like the crappy cardboard used to box Made In China crap you get at Walmart.
Let's go Brandon!