09-28-2021, 02:45 PM
Just for anyone who is curious about clips or alignment.
Some tests recently done in the Form 1 community showed a massive gain in performance from clipping. I am a long time tinkerer/builder and recent FFL/SOT and wouldn't let a can out of the door without clipping first. Some of the best performing baffle designs never really got tested without clips in mind due to the fact that they have become a standard. When any videos surface and someone is complaining about can performance the first 100 questions are (you guessed it), " what clips are you running?" I know the original poster is happy with what he has but if you want to pick up some very easy dB gains (or drop), single clip each baffle for a high pressure round.
POI shift does still occur on MOST barrels when attaching a suppressor just due to the change in harmonics. The alignment of the clips is important especially in single clipped configs and my favorite way to achieve this is with super glue gel. Makes assembly very easy and keeps everything aligned and once you heat that can up the glue just burns off so you don't have a mess if you ever have to break it down. Anytime the suppressor is broken down I re-zero just to make sure.
My intention isn't to hijack only to pass along info that is slightly different than stated above. Feel free to holler at me if anyone has any form 1 questions.
Cheers
Some tests recently done in the Form 1 community showed a massive gain in performance from clipping. I am a long time tinkerer/builder and recent FFL/SOT and wouldn't let a can out of the door without clipping first. Some of the best performing baffle designs never really got tested without clips in mind due to the fact that they have become a standard. When any videos surface and someone is complaining about can performance the first 100 questions are (you guessed it), " what clips are you running?" I know the original poster is happy with what he has but if you want to pick up some very easy dB gains (or drop), single clip each baffle for a high pressure round.
POI shift does still occur on MOST barrels when attaching a suppressor just due to the change in harmonics. The alignment of the clips is important especially in single clipped configs and my favorite way to achieve this is with super glue gel. Makes assembly very easy and keeps everything aligned and once you heat that can up the glue just burns off so you don't have a mess if you ever have to break it down. Anytime the suppressor is broken down I re-zero just to make sure.
My intention isn't to hijack only to pass along info that is slightly different than stated above. Feel free to holler at me if anyone has any form 1 questions.
Cheers