09-20-2021, 06:07 PM
I've got springco whites in all of my lowers - so in this instance springing alone isn't the issue. Unless it's just a bad/heavy spring which is always a possibility but less likely with the Springco stuff. I have other springs (at least one of each of the springco colors 
) in the parts drawers that I can look at using. I'll start by moving the G trigger from the lower that is NOT functioning correctly to a lower it IS functioning correctly in, to see if the issue follows the trigger. After that I'll try the buffer and spring. After that - I'll see if a buffer tube swap addresses the issue. Mostly curiosity at this point to find the one piece or stack of pieces that is causing things to not work just so...
) in the parts drawers that I can look at using. I'll start by moving the G trigger from the lower that is NOT functioning correctly to a lower it IS functioning correctly in, to see if the issue follows the trigger. After that I'll try the buffer and spring. After that - I'll see if a buffer tube swap addresses the issue. Mostly curiosity at this point to find the one piece or stack of pieces that is causing things to not work just so...