08-21-2021, 03:51 PM
Grayfox, i hope that pic is not to scale as I would expect those cases to experience failure of case head separation on the initial firing or would certainly not reload them.
On your brass I would cut one off a little above that and file it down smooth to the marks and see how much you have left of the thickness of the case at that point. Military brass is thicker than commercial brass and you might still have as much brass there as commercial brass does. Might take sacrifice of a couple cases though to figure that out.
I might still have some once fired 308 brass if I do I will PM you later.
On your brass I would cut one off a little above that and file it down smooth to the marks and see how much you have left of the thickness of the case at that point. Military brass is thicker than commercial brass and you might still have as much brass there as commercial brass does. Might take sacrifice of a couple cases though to figure that out.
I might still have some once fired 308 brass if I do I will PM you later.