Removing a loctite bedded barrel

[Old Bob]

Why? Piece of mop handle squared off and a rubber mallet, couple of sacks and the barrel will pop right out.

^^^
What I've done.

I had an old, broken, ash baseball bat turned down to fit in my uppers. One good whack with a dead-blow mallet will almost shoot a loctited (green 620) barrel right out of an upper.

I was watching one of those gunsmithing videos from Midway USA. When installing a rifle buffer tube on a lower receiver they put blue Loctite on the tube threads. I've never done that on a buffer tube. Should I be doing that? I've never had one come loose. :confused: