Upper Receiver????
|
Upper Receiver????
|
04-05-2021, 12:25 AM
One of my barrels was loose inside my Alexander arms upper receiver. Would my barrel nut torqued to spec keep it from moving? I didn't think so as i couldn't get less then 2" groups. I took it apart, lapped it, bedded barrel with loctite and then torqued the barrel nut to spec and my groups were instantly cut in half. Everyone might not have the same experience but im convinced and lap and bed everytime now.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Upper Receiver???? - by JT3 - 04-03-2021, 01:14 PM
Upper Receiver???? - by BlogSarge - 04-03-2021, 01:24 PM
Upper Receiver???? - by VASCAR2 - 04-03-2021, 01:38 PM
Upper Receiver???? - by Bigs28 - 04-03-2021, 08:02 PM
Upper Receiver???? - by PVBoom - 04-03-2021, 09:02 PM
Upper Receiver???? - by Red*Lion - 04-04-2021, 11:49 PM
Upper Receiver???? - by Bigs28 - 04-05-2021, 12:25 AM
Upper Receiver???? - by Klem - 04-05-2021, 01:59 AM
Upper Receiver???? - by BlogSarge - 04-05-2021, 01:59 AM
Upper Receiver???? - by JT3 - 04-08-2021, 10:00 PM
Upper Receiver???? - by JT3 - 04-08-2021, 10:02 PM
Upper Receiver???? - by lazyengineer - 04-08-2021, 10:54 PM
Upper Receiver???? - by A5BLASTER - 04-09-2021, 03:28 AM
Upper Receiver???? - by montana - 04-09-2021, 04:41 AM
Upper Receiver???? - by Klem - 04-09-2021, 04:47 AM
Upper Receiver???? - by A5BLASTER - 04-09-2021, 03:00 PM
Upper Receiver???? - by lazyengineer - 04-09-2021, 03:58 PM
Upper Receiver???? - by montana - 04-09-2021, 04:08 PM
Upper Receiver???? - by A5BLASTER - 04-09-2021, 05:52 PM
Upper Receiver???? - by montana - 04-09-2021, 06:24 PM
Upper Receiver???? - by Old Bob - 04-09-2021, 11:51 PM
Upper Receiver???? - by A5BLASTER - 04-10-2021, 02:47 AM
Upper Receiver???? - by Old Bob - 04-10-2021, 08:31 PM
Upper Receiver???? - by Klem - 04-04-2021, 01:01 AM
Upper Receiver???? - by montana - 04-09-2021, 01:35 PM
Upper Receiver???? - by montana - 04-09-2021, 03:45 PM
|
