Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Optimal 0-600 yds Barrel
#22
biodsl Wrote:Lapua makes a 100 grain FMJ with a stunning BC of .250! Also check the BC on their 144gr FMJBT.

https://www.lapua.com/bullets/fmj/

BD:

That Lapua 100 gr FMJ looks to be as perfect as you will get with a tangent ogive flat base bullet. I bet that bullet is super accurate to 300. I would shoot it at 200 and 300 without hesitation. 500 too if there was little wind. .250 is about right for the design and G-1 would be more honest than G-7 with a flat base bullet.

LR-55
Reply


Messages In This Thread
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 07:09 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 08:40 PM
Optimal 0-600 yds Barrel - by biodsl - 10-19-2021, 09:20 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 09:44 PM
Optimal 0-600 yds Barrel - by biodsl - 10-19-2021, 10:20 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 10:39 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 10:43 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 11:31 PM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 12:31 AM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 01:27 AM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 02:19 AM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 03:03 AM
Optimal 0-600 yds Barrel - by StoneHendge - 10-20-2021, 04:09 AM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 06:49 AM
Optimal 0-600 yds Barrel - by myrifle - 10-20-2021, 11:38 AM
Optimal 0-600 yds Barrel - by LR1955 - 10-20-2021, 12:28 PM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 12:44 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 04:18 PM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 08:31 PM
Optimal 0-600 yds Barrel - by biodsl - 10-20-2021, 08:37 PM
Optimal 0-600 yds Barrel - by lazyengineer - 10-21-2021, 09:35 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 10:31 PM
Optimal 0-600 yds Barrel - by LR1955 - 10-20-2021, 10:34 PM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 11:17 PM
Optimal 0-600 yds Barrel - by lazyengineer - 10-20-2021, 11:24 PM
Optimal 0-600 yds Barrel - by VASCAR2 - 10-21-2021, 11:51 AM
Optimal 0-600 yds Barrel - by grayfox - 10-21-2021, 05:13 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)