Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Optimal 0-600 yds Barrel
#26
Vascar do you know the BC for the Prvi 110 fmj?
edit: found it online, 0.411

If so, then for 500 msl:
16" 2510, 600yd 1464 ft/s, 523 ke
18", 2570, 600yd- 1505 ft/s, 553 ke
20", 2614, 600 yd - 1536 ft/s, 576 ke

And all adjustments for elevation would flow from these. But they all look to be above his min reqts.
(ie, -100 elev for the 16" leads to 1445 ft/s, which would stay above 1320 for -300 elev)
A 0.411 vice the original 0.420 for the 123 bt is not much of a BC change at these distances...
"Down the floor, out the door, Go Brandon Go!!!!!"
Reply


Messages In This Thread
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 07:09 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 08:40 PM
Optimal 0-600 yds Barrel - by biodsl - 10-19-2021, 09:20 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 09:44 PM
Optimal 0-600 yds Barrel - by biodsl - 10-19-2021, 10:20 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 10:39 PM
Optimal 0-600 yds Barrel - by grayfox - 10-19-2021, 10:43 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-19-2021, 11:31 PM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 12:31 AM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 01:27 AM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 02:19 AM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 03:03 AM
Optimal 0-600 yds Barrel - by StoneHendge - 10-20-2021, 04:09 AM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 06:49 AM
Optimal 0-600 yds Barrel - by myrifle - 10-20-2021, 11:38 AM
Optimal 0-600 yds Barrel - by LR1955 - 10-20-2021, 12:28 PM
Optimal 0-600 yds Barrel - by grayfox - 10-20-2021, 12:44 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 04:18 PM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 08:31 PM
Optimal 0-600 yds Barrel - by biodsl - 10-20-2021, 08:37 PM
Optimal 0-600 yds Barrel - by lazyengineer - 10-21-2021, 09:35 PM
Optimal 0-600 yds Barrel - by TA03827 - 10-20-2021, 10:31 PM
Optimal 0-600 yds Barrel - by LR1955 - 10-20-2021, 10:34 PM
Optimal 0-600 yds Barrel - by Klem - 10-20-2021, 11:17 PM
Optimal 0-600 yds Barrel - by lazyengineer - 10-20-2021, 11:24 PM
Optimal 0-600 yds Barrel - by VASCAR2 - 10-21-2021, 11:51 AM
Optimal 0-600 yds Barrel - by grayfox - 10-21-2021, 05:13 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)