10-26-2020, 04:17 PM
Tighten down the rear screw first and dont go over 40 lbs of torque unless you absolutely have too.
My howa grendel I had and sold to my best friend loved to be at 35 lbs on the rear and 30 on the front screw. But I had it in a Boyd's stock and hokiepokiekids bottom metal. So that may why, the plastic stuff howa uses might flex differently.
Check barrel clearance with a peice of note book paper folded in half. If it clears that you have plenty of clearance.
My howa grendel I had and sold to my best friend loved to be at 35 lbs on the rear and 30 on the front screw. But I had it in a Boyd's stock and hokiepokiekids bottom metal. So that may why, the plastic stuff howa uses might flex differently.
Check barrel clearance with a peice of note book paper folded in half. If it clears that you have plenty of clearance.