universal seating die

[Harpoon1]

What he ^ said. Too much slop in that setup I'll stick with my Forster's

Well, Forster would be my first pick also, if for nothing else than the finer pitch threading and .025 adjustment per thimble revolution. And to be fair, I wasn’t all that impressed with “.003-.005” total runout either. Having said that, my Forster dies weren’t all that great in my Lyman All American 8! Turns out the press was the problem. Most of the stations were out of alignment. The problem with the video is, we don’t know if it was the die, the press, brass prep or any combination of all three etc.........It may be the press is causing the issue, we don’t know. There’s just not enough information to make an informed decision. At least for me, other “experts” opinions may very!

Having said all that, to summarize what’s going on here. We’ve got people who have zero first hand experience with the Frankford system, have not loaded 1 bullet with it, passing judgment on it and offering their “expert” opinion on whether it works or not, from watching a short YouTube video. And then misrepresenting what was said and shown in the video. You can’t make it up!