Dented case on ejection

[Schwag173]

No idiocy! Two things cause it:

1) Most commonly it is striking the deflector behind the ejection port. That's why the deflector is there. If you don't like the dented case mouths, put a piece of the loop (soft) side of velcro there and it will disappear.

2) Cases striking the concrete. Obvious fix, don't shoot on hard surfaces.....LOL.

There is a permanent fix, and that requires shortening the ejector spring very slightly, and there is a link to directions on how to do that on the board.

Might the problem also be fixed if a guy were to swap out for the next-heavier weight of buffer? (I already have an M-16 bolt carrier.)