6mm ARC

[StoneHendge]

I have spent far too many hours trying to true Quickload. To adjust ba/bullet weight to match velocity the pressure rises to the level where it would be visible. There are no pressure signs at all, no change in primer shoulders, no cratering, no ejector marks. Thoughts?

31 grains of CFE223 is hot if you extrapolate 6mm PPC (smaller case) and 6mm BR Remington data (bigger case) . Go to Hodgdons website and look at CFE 223 data for the 6mm BR Remington - 32 grains for 90s with 24" velocity just over 2900 and 30 grain max for 100s