06-26-2020, 10:48 AM
I used to use a Hornady seating die until I bought a Redding competition seating die. Both dies have a floating chamber that holds the bullet in place on the way up.
This chamber on the Redding is an extremely tight fit without any side to side looseness.
With the Hornady, there's quite a bit of side to side flop in the floating chamber. The Hornady dies worked but given flop or a precise fit, I'll take the latter.
This chamber on the Redding is an extremely tight fit without any side to side looseness.
With the Hornady, there's quite a bit of side to side flop in the floating chamber. The Hornady dies worked but given flop or a precise fit, I'll take the latter.