06-08-2020, 06:05 AM
I dont mix brass in specific loads, but i have not seen any velocity or pressure difference. I dont expect to have 5 shots with mixed brass group nice, but one or the other wont make much difference. There is so many other factors that can affect accuracy that I have to improve on.
Its a howa mini bolt action. I have seen no issues with primers, and to be honest most if not all primer issues are related to excessive headspace. A properly headspaced round wont show much primer indication before you have other signs. Things that are visible on my rifle is ejector marks on high loads, and then im probably quite high.
The 6½ BR worked really fine, there has been some problems with delivery in my local shop due to covid, but CCI400 works nice and if there was something i would try its CCI 450 but they dont stock it here.
How about federal gold medal match? Or should i just keep going cci 400?
Its a howa mini bolt action. I have seen no issues with primers, and to be honest most if not all primer issues are related to excessive headspace. A properly headspaced round wont show much primer indication before you have other signs. Things that are visible on my rifle is ejector marks on high loads, and then im probably quite high.
The 6½ BR worked really fine, there has been some problems with delivery in my local shop due to covid, but CCI400 works nice and if there was something i would try its CCI 450 but they dont stock it here.
How about federal gold medal match? Or should i just keep going cci 400?

