05-24-2020, 02:56 AM
grayfox Wrote:The other thing using the case comparator (with the 0.350 bushing) is you have numbers that others can relate to. And numbers you can relate to the Saami drawing. With the 10mm case you have neither of these.
Grey,
Be careful, even the Hornady gauge is not as precise as it could be. This makes comparisons with other gauges fraught. Not an issue if we are talking differences between two readings, or if using the same gauge of course and no doubt what the Stoney Pt engineers had in mind when they decided on how precise for mass production. If we want to compare against specs and other gauges we will need to machine our own.
My .350 is narrower.
[ATTACH=CONFIG]16198[/ATTACH]