05-05-2020, 12:50 AM
It's not ideal that your case prep routine dictates what powders you use.
I only use One Shot for handgun. Similar to you, I don't want more or less spray in some necks, and on some sides, and not others. Instead, I roll 5 or 6 at a time on a pad using RCBS Case Lube. Then after sizing rub the whole lot in an old towel for 30 secs to get most of it off. Nothing gets into the case necks to interfere with start friction and in that respect every case is consistent. It takes longer than a quick spray from a can but, swings and roundabouts.
I only use One Shot for handgun. Similar to you, I don't want more or less spray in some necks, and on some sides, and not others. Instead, I roll 5 or 6 at a time on a pad using RCBS Case Lube. Then after sizing rub the whole lot in an old towel for 30 secs to get most of it off. Nothing gets into the case necks to interfere with start friction and in that respect every case is consistent. It takes longer than a quick spray from a can but, swings and roundabouts.