Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AR Comp and SMK 120 - looking high and low for some data
#13
My stuff is packed as I am moving so just some brief input from memory.

I used quickload to get base values. SMK was pretty close to predicted. I think Hornady ELD showed pressure well before predicted in my ladder loads.

22” JP barrel.

New Starline brass. 2.26 coal

I had to cut the day of gathering data short because the brightness was causing grief to my chrono. (Have since picked up a lab radar)

To my memory, AR Comp and 120 gr smk worked very well. I don’t remember the ladder loads and which produced what. On the high end one was 2600 FPS + with sub MOA. No pressure signs, but noticeable more recoil than the rest.

Better groups and velocity than Hornady ELD. I think ELD might have been 120 gr?

For what ever reason the lighter ELD started to show pressure signs a tad above the velocity of what the factory 123 GR ELD produce = 2510 - 2550’ish. Maybe 50 FPS more than factory showed signs where quickload simulated it shouldn’t. But I start below and work up so all was well as I didn’t keep trying hotter.

I know I haven’t tried 107 TMK, hopefully I’m not confusing Berger in there, but I don’t believe I did any loads for those yet.
Reply


Messages In This Thread
AR Comp and SMK 120 - looking high and low for some data - by newb - 04-02-2020, 03:32 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)