03-10-2020, 10:09 AM
Update
Just assembled said upper and took it out for a few safety checks/1 rd in mag, if it locks back etc.
16 mid length Hanson barrel drilled out to .076
Monster bolt
Rainier m16 farrier
H buffer
Factory 123gr American gunner ammo and Barnaul 100gr steel stuff
It ran fine and ejected, locked the bolt with both types of ammo.
But the Hornady stuff just barely popped out at about 2-3 oclock, maybe a couple feet. While the wolf cases ejected way stronger and about 10 foot at the 5 oclock.
Would of thought the brass stuff with .076 would eject stronger..
Also the monster bolt, I noticed a o ring and black insert.. as the brass cases were pretty gouged from the extractor. Should I try without the oring or insert?
Just assembled said upper and took it out for a few safety checks/1 rd in mag, if it locks back etc.
16 mid length Hanson barrel drilled out to .076
Monster bolt
Rainier m16 farrier
H buffer
Factory 123gr American gunner ammo and Barnaul 100gr steel stuff
It ran fine and ejected, locked the bolt with both types of ammo.
But the Hornady stuff just barely popped out at about 2-3 oclock, maybe a couple feet. While the wolf cases ejected way stronger and about 10 foot at the 5 oclock.
Would of thought the brass stuff with .076 would eject stronger..
Also the monster bolt, I noticed a o ring and black insert.. as the brass cases were pretty gouged from the extractor. Should I try without the oring or insert?