02-22-2020, 01:19 PM
I have used literally thousands of factory seconds bullets from a number of manufacturers. Most seconds have nothing wrong with them. I worked in a manufacturing plant years ago making small electronic parts. As parts (bullets too) come out of the machines a inspector is constantly monitoring the down stream quality. If something is amiss, the inspector stops the machine. The parts that came out since the last inspection are then removed from the conveyor and placed into bins. The problem is diagnosed and the machine is started again, slowly, and the machine is readjusted until in spec parts are being produced again. The set up parts are also placed in bins. Only after in spec parts are being produced will the manufactured parts be allowed to flow down the assembly line. In the case of bullets, most have cosmetic issues. Points not perfect, perhaps a wrinkle in the jacket, etc. Seconds are perfect for load development, plinking and general shooting. I, personally, would not use them in a match or any other use that would require pristine accuracy.