New Reloader - Reloading Workflow Sanity Check

[A5BLASTER]

Just reloaded my first 10 rds.

I took uber long as I was quadruple checking everything.

In the end, this is pretty darn easy...

[ATTACH=CONFIG]15480[/ATTACH][ATTACH=CONFIG]15481[/ATTACH]

You might want to take a look at your seating die. That are your really compressing the powder load.

Your bullets all have a compression ring just under the tip. I get that sometimes when I'm seating the 129 ablr over my load of h4895. But that bullet takes up a lot of room in the case.

I'm not sure how well compressed loads will play in the ar chamber. In a bolt action it has been go e for me but it might not play well in the ar.

Just food for thought.