Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
6.5 staball powder work ups.
#24
So bringing this back to live.

Haven't run the 85 Maker yet but did run a ladder with this powder in PPU brass today with some 123 nosler CC.

Started at 27 and worked up 1 round every 2 tenths to 31.8 grains.


27-1870
27.2-1864
27.4-1871
27.6-1912
27.8-1915
28-1941
28.2-1977
28.4-1982
28.6-2036
28.8-2041
29-2065
29.2-2094
29.4-2110
29.6-2132
29.8-2142
30-2196
30.2-2221
30.4-2235
30.6-2253
30.8-2262
31-2280
31.2-2348
31.4-2323
31.6-2314
31.8-2340

Seems like I had some bad throws from my chargemaster lite when doing this ladder.

There was still plenty of room in the case for more powder. No pressure signs on the brass are primers and bolt lift was normal.

I may load up a few more starting at 31 and work it up to 32.8 and see where it ends out at.

Coal length for this load is 2.255. Looks like there could be promise with this powder with the lighter weight pills from say 123 and lighter, well maybe.
Reply


Messages In This Thread
6.5 staball powder work ups. - by A5BLASTER - 12-20-2019, 02:06 AM
6.5 staball powder work ups. - by Nimrod - 12-20-2019, 02:09 AM
6.5 staball powder work ups. - by 65GbySeven - 12-20-2019, 09:20 PM
6.5 staball powder work ups. - by A5BLASTER - 12-20-2019, 09:22 PM
6.5 staball powder work ups. - by LRRPF52 - 12-20-2019, 10:40 PM
6.5 staball powder work ups. - by A5BLASTER - 12-20-2019, 10:49 PM
6.5 staball powder work ups. - by A5BLASTER - 12-21-2019, 01:29 AM
6.5 staball powder work ups. - by Popeye212 - 12-21-2019, 02:49 PM
6.5 staball powder work ups. - by A5BLASTER - 12-21-2019, 05:56 PM
6.5 staball powder work ups. - by PGW Steve - 12-22-2019, 10:44 AM
6.5 staball powder work ups. - by Rosecrans1 - 12-22-2019, 12:22 PM
6.5 staball powder work ups. - by LR1955 - 12-22-2019, 01:04 PM
6.5 staball powder work ups. - by A5BLASTER - 12-22-2019, 01:14 PM
6.5 staball powder work ups. - by Popeye212 - 12-22-2019, 04:15 PM
6.5 staball powder work ups. - by A5BLASTER - 12-22-2019, 08:47 PM
6.5 staball powder work ups. - by kmon - 12-22-2019, 08:52 PM
6.5 staball powder work ups. - by A5BLASTER - 12-22-2019, 09:16 PM
6.5 staball powder work ups. - by A5BLASTER - 12-22-2019, 11:52 PM
6.5 staball powder work ups. - by kmon - 12-23-2019, 01:35 AM
6.5 staball powder work ups. - by A5BLASTER - 12-23-2019, 01:46 AM
6.5 staball powder work ups. - by A5BLASTER - 01-06-2020, 02:15 AM
6.5 staball powder work ups. - by 65GbySeven - 01-06-2020, 03:48 AM
6.5 staball powder work ups. - by A5BLASTER - 01-06-2020, 04:08 AM
6.5 staball powder work ups. - by A5BLASTER - 02-08-2020, 01:48 AM
6.5 staball powder work ups. - by Lemonaid - 02-08-2020, 03:59 AM
6.5 staball powder work ups. - by Former Cav - 01-21-2023, 01:43 PM
6.5 staball powder work ups. - by Old Bob - 01-21-2023, 05:53 PM
6.5 staball powder work ups. - by Worstletter - 09-19-2023, 03:31 PM
6.5 staball powder work ups. - by Worstletter - 11-08-2023, 03:39 PM
6.5 staball powder work ups. - by Legionnaire - 11-08-2023, 07:23 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)