02-03-2020, 03:28 AM
If you are going to use the Hornady Custom Grade Dies and load there 120 and 123 ELD bullets, I would check to make sure that the Bullet Seating Stem does not push on the plastic ballistic tip and mush it. I load the Berger 130 VLD's and use Hornady PN 397106 Bullet Seating Stem to clear the tip of the bullet. It is 0.100" deeper then the one that comes with the seating die. I also have the Hornady PN 044090 Micro Adjust seating stem. It makes it easer to keep track of seating depth when you change bullet types or manufactures.