6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Bolt Actions & Single Shots v
Howa/Oryx finally assembled

Linear Mode
Howa/Oryx finally assembled
Doorman63 Offline
Junior Member
**
Posts: 19
Threads: 2
Joined: Jan 2019
#11
01-13-2020, 10:42 AM
JSH Wrote:I got my Oryx chassis. Thought it would be quick swap. Gonna have to dig around and see if I have some tall or extra tall rings.

With the 0moa rail I was able to use low rings with a 50mm end bell on my scope. Clears by about 3/16”
Find
Reply


Messages In This Thread
Howa/Oryx finally assembled - by Doorman63 - 01-09-2020, 01:39 AM
Howa/Oryx finally assembled - by 6.5GMan - 01-09-2020, 04:27 AM
Howa/Oryx finally assembled - by Doorman63 - 01-09-2020, 11:15 AM
Howa/Oryx finally assembled - by Gringoloco - 01-10-2020, 01:31 AM
Howa/Oryx finally assembled - by 6.5GMan - 01-10-2020, 07:01 AM
Howa/Oryx finally assembled - by Doorman63 - 01-11-2020, 07:17 PM
Howa/Oryx finally assembled - by Moose69 - 01-12-2020, 09:08 PM
Howa/Oryx finally assembled - by Doorman63 - 01-12-2020, 10:59 PM
Howa/Oryx finally assembled - by JSH - 01-13-2020, 03:01 AM
Howa/Oryx finally assembled - by Doorman63 - 01-13-2020, 10:42 AM
Howa/Oryx finally assembled - by BLUESGUNNER - 01-16-2020, 07:43 PM
Howa/Oryx finally assembled - by Doorman63 - 01-16-2020, 11:35 PM
Howa/Oryx finally assembled - by JSH - 01-18-2020, 01:54 PM
Howa/Oryx finally assembled - by Doorman63 - 01-26-2020, 02:40 AM
Howa/Oryx finally assembled - by Doorman63 - 02-03-2020, 02:03 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)