Muzzle brake problem

[FLshooter]

Ok thanks for the feedback, I have a VG on the way and I am shopping around for a new barrel/upper. Any good deals going on rn for 18in?

The upper (minus the barrel and minus the MB) might be ok to use, some guys do that with bca stuff.
As for barrels,
https://www.armorally.com/product-tag/ba...-5-grendel

has 2 nice 18" BA barrels, good site to deal with.
You can get a good upper assembly from using either Aero upper Rcvr or BCM's, then use a matrix HG from joebob's.
Add gas tube and GB and you're off to the races.
Aero even has some complete uppers but I build my own.

I’ve used BCA uppers minus the barrel for my own builds,and used many BCA parts in builds for others.The upper receivers and handguards are as good as any.Never had a problem w/BCA gas blocks or tubes either.Even the BCG works well.Chances are,you’ll probably need a different size gas block ,depending on nbarrel contour.
Two of my BCA uppers are 6.5 Grendel.I installed a custom 24 inch Bartlein heavy barrel in one and a 22inch pre fit Criterion HBar in the other.Both are tack drivers.The Bartlein is more accurate at longer distances.
I think any barrel from a reputable manufacturer is better than a BCA.I’d get the best barrel I can afford.In the $250-$300 rage,I have done well w/Criterion pre fits.I am thinking the barrels you recommended would be comparable.
I found that when I spring $550 for a Bartlein,I make it up in ammo.Because Bartleins and other high quality barrels require very little break in and are easier to hand load for.My Bartleins and Krieger shoot just about anything well.