12-23-2019, 06:20 PM
VASCAR2 Wrote:I shot my Cz 527 American a couple days ago and the floor plate jarred loose on my Supplied mag. I made sure the floor plate locking tab was seated in the hole of the floor plate and it never came loose again. I had no malfunctions in my two mags. I fired factory 123 Black ELD-M, reloads with 123 grain A-Max, 100 grain TTSX and 90 grain TNT, all functioned fine. I’m the weak link in the performance of this rifle but I still need to tweak the take up on the trigger and check the stock to ensure the barrel isn’t in contact with the stock after it heats up.
Same here. Pound for pound this cz is the most consistent accurate out of the box rifle I have ever owned.
I have mine in a bell and carlson stock and I noticed the mags have a lil front to back play in the bottom metal.
May try the old duck tape trick and see if tighting up the fitment stops what's happening.
When it happens a bullet tip gets in that lil cut out and it stops the mag feed cold. Can't even get the top round to strip off. It jams the mag up.
Other then that issue it feeds great. Not as smooth as the howa mind you but smooth enough to get fast follow up shots if need be.
Strange thing is it only happens when I lock the mag in with 5 rounds. If I put a mag with 4 rounds in it, the problem doesn't happen.