6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel ARs and Other Semi-Autos v
Lapping project - trying this out

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Lapping project - trying this out
Wargrendeleagle Offline
Member
***
Posts: 172
Threads: 2
Joined: Sep 2018
#4
09-30-2019, 01:56 AM
FRB6.5 Wrote:Need a Crow's foot for the barrel nut. Two listed here (assuming the 16" uses the same 1 1/8" wrench), one of which needs access to a bench grinder to make it fit.:
http://www.65grendel.com/forum/showthrea...post217215

Moly/Lithium mix grease such as AeroShell 33 is typically used.

Yeah I ordered a crowsfoot off Amazon and ground it down. Custom made tool! I've heard/read to use grease and not antiseize on the barrel nut but I can't remember exactly why. I know that last part wasn't very useful though.
Find
Reply


Messages In This Thread
Lapping project - trying this out - by Bigs28 - 09-30-2019, 01:34 AM
Lapping project - trying this out - by FRB6.5 - 09-30-2019, 01:35 AM
Lapping project - trying this out - by Wargrendeleagle - 09-30-2019, 01:56 AM
Lapping project - trying this out - by Klem - 09-30-2019, 02:02 AM
Lapping project - trying this out - by just_john - 09-30-2019, 11:23 AM
Lapping project - trying this out - by A5BLASTER - 09-30-2019, 03:16 PM
Lapping project - trying this out - by montana - 09-30-2019, 03:24 PM
Lapping project - trying this out - by FRB6.5 - 09-30-2019, 04:53 PM
Lapping project - trying this out - by ricsmall - 09-30-2019, 05:16 PM
Lapping project - trying this out - by Growler - 09-30-2019, 06:04 PM
Lapping project - trying this out - by Klem - 09-30-2019, 08:43 PM
Lapping project - trying this out - by ARErector - 10-01-2019, 10:26 PM
Lapping project - trying this out - by Lemonaid - 10-07-2019, 05:16 AM
Lapping project - trying this out - by Klem - 10-07-2019, 07:27 AM
Lapping project - trying this out - by Wheelhorse - 10-07-2019, 11:38 AM
Lapping project - trying this out - by imaguy3 - 10-07-2019, 07:29 PM
Lapping project - trying this out - by mtnlvr - 10-07-2019, 11:44 PM
Lapping project - trying this out - by just_john - 10-08-2019, 11:34 AM
Lapping project - trying this out - by Growler - 10-08-2019, 06:17 PM
Lapping project - trying this out - by montana - 10-08-2019, 07:41 PM
Lapping project - trying this out - by LRRPF52 - 10-08-2019, 07:57 PM
Lapping project - trying this out - by ARErector - 10-10-2019, 02:54 AM
Lapping project - trying this out - by LRRPF52 - 10-10-2019, 03:40 AM
Lapping project - trying this out - by Tm1293 - 10-12-2019, 01:24 AM
Lapping project - trying this out - by A5BLASTER - 10-12-2019, 01:03 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)