09-29-2019, 04:35 PM
The Brownells tool works "backwards" from the others. The torque wrench goes into the rear of it and you are to put your barrel nut wrench in the vise. I find it difficult to keep everything in place. The vise they use in their video is quite different in design than most people have access to so the wrench isn't going to lay flat and be supported like they show.
You can kludge it into sort of a reaction rod style with some 1/2" square bar stock, but ideally they would need welded together to be truly stable.
You can kludge it into sort of a reaction rod style with some 1/2" square bar stock, but ideally they would need welded together to be truly stable.