02-16-2012, 07:14 PM
Leadfarmer Wrote:He did not for the Grendel but he measured it with a caliper and also placed an AK round in the bolt and it held it nice and tight. The Grendel round wobbled in the bolt assembly. I have already ordered a bolt assembly from AA. The barrel is from Satern and is 6.5 Grendel. So, in my understanding if it only takes a bolt and a barrel to make a Grendel and there is nothing wrong with the barrel, then the problem must lie in the bolt assembly. Also he said when you looked at it from underneath you could see the bolt was not fitting properly that it was slightly crooked. I have read your suggested thread and again the bolt I have is undoubtedly a 7.62x39 bolt, I need a Grendel Bolt and have on on order from A/A. Should be here Saturday and problem should be solved. I know that Satern and Lother use A/A Bolts for there Barrels.
LF:
LW will chamber for either bolt at the request of the customer. I don't think Satern is making barrels for AA anymore but are probably making the samd thing using a name other than 'Grendel'.
LR1955