|
Elander mags
|
05-23-2019, 03:32 PM
Another problem with failure to feed is the larger diameter case head of the 6.5 Grendel case head fails to seat on the bolt face during the feeding cycle. It is a good idea to mod the ejector which won’t hurt anything and can eliminate one potential cause of failure to feed. Here is a link to the mod.
http://bulletin.accurateshooter.com/2014...artridges/ |
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Elander mags - by oyster - 04-22-2019, 08:28 PM
Elander mags - by A5BLASTER - 04-23-2019, 12:13 AM
Elander mags - by LongPoke - 04-23-2019, 04:47 AM
Elander mags - by A5BLASTER - 04-23-2019, 06:39 AM
Elander mags - by Wanderson - 05-19-2019, 12:30 AM
Elander mags - by oyster - 05-21-2019, 01:55 PM
Elander mags - by c3k - 05-23-2019, 11:59 AM
Elander mags - by LRRPF52 - 05-23-2019, 12:59 PM
Elander mags - by A5BLASTER - 05-23-2019, 01:31 PM
Elander mags - by VASCAR2 - 05-23-2019, 03:32 PM
Elander mags - by lazyengineer - 05-23-2019, 03:37 PM
Elander mags - by c3k - 05-23-2019, 08:25 PM
Elander mags - by lazyengineer - 05-23-2019, 10:55 PM
Elander mags - by c3k - 05-24-2019, 02:43 PM
Elander mags - by A5BLASTER - 05-24-2019, 03:53 PM
Elander mags - by c3k - 05-24-2019, 05:39 PM
Elander mags - by Growler - 05-25-2019, 07:00 PM
|
