Ok, this has been non stop on our end. Seriously. I have one local customer that brought me his stock. I have a CNC fixture and program in place to reduce web thickness by .020 to .045 pending magazines. Not sure how his set up is going to work down the road with other (new production) magazines, but he is happy at the moment.
So far, 2 or 3 of you seem to be in the same situation.
Here is what I have done. I've built a CNC fixture to hold an un altered / un bedded rifle stock #1003 that isn't feeding properly. I'm reducing the web thickness .020 to .045 pending magazines and bottom metal. What little I have tested it looks great, but not sure how the other "proper" magazines will perform. I have a little worry that the bolt will bind on the mag lips.
Communication with LS has dropped off. Unfortunately but that is across the board on industry contacts these days.
***When they call on us, I'll cover it on my end.
You can send me your stock, I can mill it, and return it. I highly suggest contacting LS first about mags as I won't be able to offer anything after modification other then shimming.
You can return the stock. If that happens I will inspect and likely await for more mags and or lot testing.
Your thoughts?
You will need to phone 620-225-6688 and get an RA# along with other instructions. Ask for Tory.
So far, 2 or 3 of you seem to be in the same situation.
Here is what I have done. I've built a CNC fixture to hold an un altered / un bedded rifle stock #1003 that isn't feeding properly. I'm reducing the web thickness .020 to .045 pending magazines and bottom metal. What little I have tested it looks great, but not sure how the other "proper" magazines will perform. I have a little worry that the bolt will bind on the mag lips.
Communication with LS has dropped off. Unfortunately but that is across the board on industry contacts these days.
***When they call on us, I'll cover it on my end.
You can send me your stock, I can mill it, and return it. I highly suggest contacting LS first about mags as I won't be able to offer anything after modification other then shimming.
You can return the stock. If that happens I will inspect and likely await for more mags and or lot testing.
Your thoughts?
You will need to phone 620-225-6688 and get an RA# along with other instructions. Ask for Tory.