01-08-2019, 06:20 PM
Tools needed:
Purple LocTite(222) or Vibra-Tite(111) Low Strength
T30 TORX bit(for action screws)
When installing the magazine catch and spring, cut a tooth pick so it is the same width as the catch and use it to hold the spring onto the catch while installing them into the trigger guard/mag well.
Per DIP's website, does the trick.
Purple LocTite(222) or Vibra-Tite(111) Low Strength
T30 TORX bit(for action screws)
When installing the magazine catch and spring, cut a tooth pick so it is the same width as the catch and use it to hold the spring onto the catch while installing them into the trigger guard/mag well.
Per DIP's website, does the trick.