01-28-2012, 06:42 PM
Sojorboy Wrote:The used upper is a 16" GDMR from AA and the new upper is from J&T Dist. I plan on calling both parties on Monday if I can't resolve the problems before then.
Ok, well, assuming no one swapped stuff, those should be proper bolts.
Something ain't right, because chances that 2 rifles from different manufacturers would have the same issue are astronomically low. The GDMR probably has a cut rifled Satern barrel, the J&T probably a button rifled Shaw.
Chamber a single round, drop the mag, fire, and see if it will eject. If it does, then load a single round in the mag, chamber the round, leave the mag in place, fire, and see if the round ejects. If it does, load two rounds in the mag, chamber one, and fire, see if the round ejects. If it does, repeat, adding a round each time. If the round does not eject at any point, return here and report.
You seek escape from pain. We seek the achievement of happiness. You exist for the sake of avoiding punishment. We exist for the sake of earning rewards. Threats will not make us function; fear is not our incentive. It is not death that we wish to avoid, but life that we wish to live. - John Galt