6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Sloppy fitting lower.

Linear Mode
Sloppy fitting lower.
rasp65 Offline
Senior Member
****
Posts: 667
Threads: 19
Joined: Mar 2011
#18
01-22-2012, 08:09 PM
This is how my bedding job came out on my lower. It is hard to see in the pic but the bedding comes up in the back about half way up the lug. [ATTACH=CONFIG]751[/ATTACH]
Find
Reply


Messages In This Thread
Sloppy fitting lower. - by K_Labs - 01-03-2012, 05:26 PM
Sloppy fitting lower. - by stokesrj - 01-03-2012, 08:19 PM
Sloppy fitting lower. - by Hektor - 01-04-2012, 04:18 AM
Sloppy fitting lower. - by LRRPF52 - 01-04-2012, 07:55 AM
Sloppy fitting lower. - by K_Labs - 01-04-2012, 08:59 AM
Sloppy fitting lower. - by stokesrj - 01-04-2012, 12:50 PM
Sloppy fitting lower. - by Drifter - 01-04-2012, 12:53 PM
Sloppy fitting lower. - by Jgloveracob - 01-07-2012, 06:27 PM
Sloppy fitting lower. - by Mutt - 01-09-2012, 04:37 AM
Sloppy fitting lower. - by sgt_murf - 01-15-2012, 03:21 PM
Sloppy fitting lower. - by rasp65 - 01-19-2012, 02:26 AM
Sloppy fitting lower. - by usmc1371 - 01-19-2012, 02:53 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:03 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:04 AM
Sloppy fitting lower. - by usmc1371 - 01-21-2012, 03:45 AM
Sloppy fitting lower. - by Deezil - 01-21-2012, 06:24 AM
Sloppy fitting lower. - by elkbow - 01-21-2012, 04:01 PM
Sloppy fitting lower. - by rasp65 - 01-22-2012, 08:09 PM
Sloppy fitting lower. - by elkbow - 01-23-2012, 01:45 AM
Sloppy fitting lower. - by jwilson1985 - 01-26-2012, 01:44 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)