Rem 700SA 6,5 Grendel project.

[Second]

Almost forgot.
I´ve been working on a solution for a picatinny spigot mount that will fit into the forend of the KRG Bravo chassis.

Have been some step by step and try and error but now it is mounted and in place. And also, it works

This is the first prototype and it is in stainless steel.
The reson for this is many but I will maybe try and make this in aluminium sometime.

Here are some pictures:
[ATTACH=CONFIG]12955[/ATTACH]
[ATTACH=CONFIG]12956[/ATTACH]
[ATTACH=CONFIG]12950[/ATTACH]
The forend of the KRG Bravo chassis is open and there is many prethreaded holes that can be used in the aluminium backbone of the forend.
I´ve measured and taken holes in the steel part so that it fit the forend and can be solid mounted in one of the prethreaded holes.

[ATTACH=CONFIG]12951[/ATTACH]
The clearance from the spigot and the barrel ended up nice. There is plenty of room for a bigger barrel in the future, if needed.

[ATTACH=CONFIG]12952[/ATTACH]
The bipods are from Nord Arms, made in carbon fiber and attaches with a QD picatinny clamp. Quick and very solid.

[ATTACH=CONFIG]12953[/ATTACH]
The bipods can also be mounted in the M-loc mounted picatinny on the forend if needed.

[ATTACH=CONFIG]12954[/ATTACH]
And overall look.