65G on Ram Silhouettes?

[cliffy]

Here is what I shoot. Started with mosberg mvp varmint in 223 which I rebarreled to 6.5 grendel. I use a bartlin barrel 1in 8 twist. Shot factory hornady 123 a max for first 3 stages well collecting brass to load. Now I shoot 100 gr ELD-M for first 3 stages at 2790fps is what my 10 shot average is. Accuracy is great using benckmark powder and just dropping from powder measure not weighing each round. Has a ED of 12 so it not bad. These rounds are a soft touch to the lands which gives me OAL of 2.275 with 28.8 gr benchmark. Start low and work your way up to this still under max in hornady manual. You really need the 26 inch barrel to get the velocity up there. On the ram load using hornady cases, CCI450 primers, 29.5gr H335, a lapua 136gr bullet seated at OAL of 2.288 you need to start low and work up this is not safe in AR. At 30gr I get a heavy bolt lift but 29.5 feel fine.

cliffy