08-28-2018, 05:54 PM
First be sure your chamber/throat are spic-n-span. Then oil reamer with a high quality cutting oil. Gently push reamer in while turning slightly until you feel it bottom out. You will need to apply a little force while turning. Make 3-4 complete turns, clean out chamber with brake cleaner and air. Check with cartridge. If you need to do more, clean reamer and re-oil, then repeat above with SLIGHT pressure. You should feel reamer when it bottoms out on shoulder. Shouldn’t take much. If u need more assistance, feel free to ask.
Member since 2011, data lost in last hack attack