08-26-2018, 02:12 AM
If your experiencing failure to feed it is a good idea to inspect the ejector in the bolt. There is a mod to the ejector on AR-15’s with large case heads like the 6.5 Grendel. This may not be contributing to your problem but worth checking.
http://bulletin.accurateshooter.com/2014...artridges/
It is surprising how much easier to use the E-Lander mags are after they were in. It sure helps to have good reliable mags to compare the rifles function so your sure the mag is the culprit and not some other underlying problem or problems.
Some 6.5 Grendel bolts work with no O ring on the extractor spring and some bolts work better with the O ring on the extractor spring/stud. Some extractors chew up the brass case rims and impede the rim from slipping onto the breach face during feeding.
Not questioning whether you are having mag problems but things I’ve experienced.
http://bulletin.accurateshooter.com/2014...artridges/
It is surprising how much easier to use the E-Lander mags are after they were in. It sure helps to have good reliable mags to compare the rifles function so your sure the mag is the culprit and not some other underlying problem or problems.
Some 6.5 Grendel bolts work with no O ring on the extractor spring and some bolts work better with the O ring on the extractor spring/stud. Some extractors chew up the brass case rims and impede the rim from slipping onto the breach face during feeding.
Not questioning whether you are having mag problems but things I’ve experienced.