01-15-2012, 10:59 PM
Been hanging out over on Snipershide and found the link over here in another post. Figured it might be a good idea to join the forum as I know there is going to be a wealth of information in here.
With me beeing a rookie over here and my first post, I think it is only appropriate that my first Grendel build gets shown off a bit.
The lower is a Stiller Precision. It is dressed with skelatized Timney 3 lb trigger, KNS pins (not in pic) and a Phase5 Tactical bolt catch release (in the pic) but had to be removed due to it not working with the upper.
![[Image: IMAG0097.jpg]](http://i192.photobucket.com/albums/z159/tra5336/IMAG0097.jpg)
I used a Magpul PRS for the stock. Nothing special there.
![[Image: IMAG0098.jpg]](http://i192.photobucket.com/albums/z159/tra5336/IMAG0098.jpg)
Then put the two together.
![[Image: IMAG0102.jpg]](http://i192.photobucket.com/albums/z159/tra5336/IMAG0102.jpg)
The upper is from AA and is the GSR version with a 24" barrel and AA muzzle break.
![[Image: IMAG0101.jpg]](http://i192.photobucket.com/albums/z159/tra5336/IMAG0101.jpg)
With me beeing a rookie over here and my first post, I think it is only appropriate that my first Grendel build gets shown off a bit.
The lower is a Stiller Precision. It is dressed with skelatized Timney 3 lb trigger, KNS pins (not in pic) and a Phase5 Tactical bolt catch release (in the pic) but had to be removed due to it not working with the upper.
I used a Magpul PRS for the stock. Nothing special there.
Then put the two together.
The upper is from AA and is the GSR version with a 24" barrel and AA muzzle break.