07-18-2018, 05:31 PM
Ok, now we have something to work with...
yeah the LBC-fired looks 0.01+/- too long for me. Idk maybe too long, maybe not?
Could be from using a 0.136 bolt for a 0.125-set chamber.
Do you have that no-go gauge - if so, do the test muvef talked about.
I know sometimes the LBC's have a longer throat and straight-angle vice compound... but the datum line should still be ~1.220 give or take. Mostly my chambers are 1.215-6, one was 1.219 iirc.... sold that one though; fired brass was 1.225/6/7 but never 1.230 out of that one.
yeah the LBC-fired looks 0.01+/- too long for me. Idk maybe too long, maybe not?
Could be from using a 0.136 bolt for a 0.125-set chamber.
Do you have that no-go gauge - if so, do the test muvef talked about.
I know sometimes the LBC's have a longer throat and straight-angle vice compound... but the datum line should still be ~1.220 give or take. Mostly my chambers are 1.215-6, one was 1.219 iirc.... sold that one though; fired brass was 1.225/6/7 but never 1.230 out of that one.
"Down the floor, out the door, Go Brandon Go!!!!!"