06-20-2018, 01:48 AM
Use a 5/8-24 jam nut (they come in pkg of 4 or 6, Amazon or brownell etc) instead of the timing/crush washers. That way you use one wrench on the comp and the other on the jam nut, counter-tightening. If there's timing of the comp then just do it with the jam nut. Use blue loktite not rocksett, if you want to disassemble the blue loktite will break bond with a butane torch to the area.
By making it tight and with the loktite, torqueing is not needed. Let it dry/set overnight.
By making it tight and with the loktite, torqueing is not needed. Let it dry/set overnight.
"Down the floor, out the door, Go Brandon Go!!!!!"