06-13-2018, 04:50 PM
I have built 2 Form 1 cans so far. I bought the tubes and end caps from SD Tactical. They are selling them as Maglite Battery extenders at the moment. D size it what you want. They were solvent traps when I last bought parts.
I turned the baffles out of 17-4 stainless which I heat treated at 1025° F using a kiln. Plain Jane 304 will work too, but 17-4 is stronger once heat treated allowing for thinner baffles.
I would recommend buying the muzzle brake adapter and then buying muzzle brakes for all your host firearms. This allows for the suppressor to be swapped between hosts rather quickly. A drop of Loctite on the external threads of the muzzle brake helps keep the can in place.
I turned the baffles out of 17-4 stainless which I heat treated at 1025° F using a kiln. Plain Jane 304 will work too, but 17-4 is stronger once heat treated allowing for thinner baffles.
I would recommend buying the muzzle brake adapter and then buying muzzle brakes for all your host firearms. This allows for the suppressor to be swapped between hosts rather quickly. A drop of Loctite on the external threads of the muzzle brake helps keep the can in place.