6.5 Grendel Forum › 6.5 GRENDEL DISCUSSION FORUMS › 6.5 Grendel Troubleshooting v
Sloppy fitting lower.

Linear Mode
Sloppy fitting lower.
Mutt
Unregistered
 
#9
01-09-2012, 04:37 AM
Jgloveracob Wrote:An O-ring on the front takedown lug takes away most of the slop.


+1

A simple oring can work wonders. Puts a little material in there and makes it a snug fit. Find one at Home depot, but make sure it fits tight onto the post.
Reply


Messages In This Thread
Sloppy fitting lower. - by K_Labs - 01-03-2012, 05:26 PM
Sloppy fitting lower. - by stokesrj - 01-03-2012, 08:19 PM
Sloppy fitting lower. - by Hektor - 01-04-2012, 04:18 AM
Sloppy fitting lower. - by LRRPF52 - 01-04-2012, 07:55 AM
Sloppy fitting lower. - by K_Labs - 01-04-2012, 08:59 AM
Sloppy fitting lower. - by stokesrj - 01-04-2012, 12:50 PM
Sloppy fitting lower. - by Drifter - 01-04-2012, 12:53 PM
Sloppy fitting lower. - by Jgloveracob - 01-07-2012, 06:27 PM
Sloppy fitting lower. - by Mutt - 01-09-2012, 04:37 AM
Sloppy fitting lower. - by sgt_murf - 01-15-2012, 03:21 PM
Sloppy fitting lower. - by rasp65 - 01-19-2012, 02:26 AM
Sloppy fitting lower. - by usmc1371 - 01-19-2012, 02:53 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:03 AM
Sloppy fitting lower. - by stokesrj - 01-19-2012, 03:04 AM
Sloppy fitting lower. - by usmc1371 - 01-21-2012, 03:45 AM
Sloppy fitting lower. - by Deezil - 01-21-2012, 06:24 AM
Sloppy fitting lower. - by elkbow - 01-21-2012, 04:01 PM
Sloppy fitting lower. - by rasp65 - 01-22-2012, 08:09 PM
Sloppy fitting lower. - by elkbow - 01-23-2012, 01:45 AM
Sloppy fitting lower. - by jwilson1985 - 01-26-2012, 01:44 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)